Model 112 TaskMaster

(Shown With Standard 6" Casters)

 The Model 112 positioner operates in the most demanding environments while providing full   musculoskeletal worker support.
   
 FOR  PRICING CALL 1-800-210-9666 or 
  


 

Shipping Information
Box Dimensions
 LxWxH = 49" x 28" 16"
Base Model Weight = 50 Lbs
Average Pallet Weight 35 Lbs


Model 112 Assembly Instructions
 Attention Eidos Customers The back of your new model 112 TaskMaster has been removed for shipping purposes. To reattach, please follow these directions. 1) Attach back to frame using the enclosed ½ -13 x 1¾ hex bolt. Tighten using ¾ wrench. 2) Slide the spring release mechanism into the channel on the frame. 3)Apply a small amount of removable thread lock to the threads of the gas spring. 4)Screw the gas spring into the release mechanism until the gas spring actuates when the lever is lifted. (Do not allow the gas spring to fully actuate, this will cause problems when bolting gas spring to back!) 5)Tighten aluminum spring spacer on top of gas spring. 6)Put top of gas spring into bracket at the top of back. Put 3/8-16 x ¼" bolt through bracket, tighten with 3/8-16 reversible lock nut using 9/16 wrenches.


 Model 112 Parts List